Agricultural belts

ROFLEX Classic V- belts
 ROFLEX-special belts can be built both with polyamide and aramid cords..
 Profiles Z, A, B 20, C, 25, 32, D, SPA, SPB, SPC, H20, H25.
 Constructive Execution:
 301: Standard execution with a lowered cord location
 311: Strengthened construction with polyamide cords.
 312: Strengthened construction with polyamide cords. High temperature resistant.
 313: Strengthened construction with aramid cords. High temperature resistant.
 314: Strengthened construction with aramid cords.
 A range of classic belts for the agricultural machinery which includes a large series of specially-designed belt-drives where using classic belts standard design is inadmissible. .

Multichannel (connected) Belts ROFLEX
 Multichannel (connected) Belts ROFLEX are specially built to be used in agricultural machinery. These belts are mainly used in friction drives with upper pulling shaft.
 Special belts high temperature resistant, they can also be built with special polyamide or aramid cords..

 Profiles:
 HA, НB, HC, HD, 3V/9J, 5V/15J, 8V/25J
 Constructive Execution:
 383: Strengthened construction with polyamide cords.
 384: Strengthened construction with polyamide cords.
 High temperature resistant.
 387: Strengthened construction with aramid cords. High temperature resistant.

ROFLEX- VARI V-Belt Variable-speed Drive
 New generation belts ROFLEX- VARI, designed for highly loaded variable- speed drives. Thanks to an optimally chosen friction coefficient, wedging of the drive is avoided.
 ROFLEX- VARI- for variable- speed drives in agricultural machinery stand out with stable friction coefficient and low relative prolongation. These belts are especially developed for effective transmitting of torque in drives working in extreme conditions.

 Constructive Execution:
 401: Strengthened construction with polyamide cords.
 404: Strengthened construction with aramid cords. (Insignificant relative prolongation). 486: Equivalent to 404 - with strengthening cross teeth on the upper part of the belt.
 488: Equivalent to 404 - with strengthening cross teeth on the upper part of the belt and textile fibers..
 Available dimensions :
 Width: 16- 100 mm (0.63- 4").
 Height: 8- 33 mm (0.31- 1.3").
 Bevel angle: 20°- 42°, 2° interval
 Outside length, La: 600- 5000 mm (24- 197") .

DANCORD Flat Belts
 DANCORD – closed belts of standard design are used in the friction drives of agricultural machinery..

 Available dimensions:
 Length: up to 14,000 mm (551")
 Width: up to 250 mm (10")
 Thickness: 4-8 mm (0.16- 0.31")

ROFLEX Hexagonal (six-sided) Belts
 ROFLEX Hexagonal Belts are specially built to drive more than two rollers, and also with a changeable direction of the rollers.
 Profiles: HAA, HBB, HCC, 25x22, HDD.

 Available dimensions:
 Length: up to 16,000 mm (630").