+359 32 397 970    

Products

PTFE Coated Glass Fabircs belts and mesh belts

We offer wide range of PTFE Coated Galss Farbics materials: flat and open-mash conveyor belts, anti-adhesion coverings, self-adhesive and regular belts, PTFE duck tape, and others.
 They are manufactured dielectrically and as electrical conductors (with antistatic covering).


 The anti-adhesion coverings from PTFE Coated Galss Farbics can be either with a glue layer (silicon or acrylic) or without it. The range of gauge is 0.035mm – 2.2mm. The width of the items is up to 4 m. The texture of the covering has a wide range of varieties- from smooth (glassy) to thin following the relief of the armouring material.


Main characteristics of the PTFE Coated Galss Farbics materials:
 •Non-burn surface
 •Heat-resistance from -60 degrees C to +260 degrees C, for a short periods of time up to +290 degrees C
 •Chemical inertness allowing contact with food
 •High resistance towards chemical surroundings
 •Low coefficient of friction
 •non-flammable surface
 •High breakage resistance
 •High dielectrical properties


PTFE Coated Galss Farbics flat and open-mesh belts are manufactured with different sizes of the openings from 1 to 8 mm and gauge from 0.5 to 1.0 mm and width 4.5 m. Their main properties and applications are as follows:
 •In food, wine and tobacco industry in conveyor belts for roasting meat, fish and chicken, drying rusks, walnuts, seeds, preparing ready-to-cook pizza
 •In the sewing industry in laminating press machines for manufacturing multiple- layered items
 •In printing industry in UV and Infra-red desiccators
 •In press machines for laminating wood items
 •For lines for applying polish and other coatings
 •In textile industry as conveyor belts for drying cloth and non-cloth materials
 •They insure working from -60 degrees C to +260 degrees C, for a short periods of time up to +290 degrees C
 •They have high breakage and flexibility strength and practically they do not stretch
 •They can be either with dielectrical or antistatic covering


Joining of PTFE Coated Galss Farbics belts
 Joining of PTFE Coated Galss Farbics belts in endless ones is done by apllying of spcial wire joining PTFE reinforcement on both sides of the belt and using wire joint from different materials - steel, PTFE, etc.

Guiders can be added on belt.

              
Metal connection of the type wolf teeth        Metal clippers(connection)        Connection alligator (hiden)

Reinforcement the sides of PTFE Coated Galss Farbics belts
 The reinforcement of the sides of PTFE Coated Galss Farbics flat and open-mesh belt is done with a strip from Thermal Teflon or PTFE Coated Glass Fabrics material. Method of joining the strip is thermally or with sewing on the edge of the belt. The reinforcement of the sides provides longer life of the PTFE Coated Galss Farbics belts. After manufacturing and before delivery all conveyor belts are subjected to precise control.